Siemens SINAMICS S120 Manual page 317

Attaching the PE connections
The shield connections are used to connect the shields of the shielded signal cables to the
Motor Module.
Attach the support plate for the shield connections at the intended position. You can break
off individual parts from the 6-part support plate corresponding to your specific
requirements, torque 3 Nm.
Figure 6-23
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3
Attaching the PE connections
Motor Modules
6.2 Motor Modules Chassis-2
315