Standards - Siemens SINAMICS S120 Manual

3.5

Standards

Note
Information on the listed standards
The standards listed in the table below are non-binding and do not in any way claim to be
complete. The standards listed do not represent a guaranteed property of the product.
Only the statements made in the Declaration of Conformity shall be deemed binding.
Table 3- 4 Fundamental, application-relevant standards in succession: EN, IEC/ISO, DIN, VDE
Standards* Title
EN ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using
sound pressure – Engineering methods for an essentially free acoustic field over a reflecting plane
ISO 14118 Safety of machinery; avoiding unexpected starting
DIN EN ISO 14118
EN ISO 9001 Quality management systems - requirements
ISO 9001
DIN EN ISO 9001
ISO 12100 Safety of Machinery
DIN EN ISO 12100 – General Design Guidelines
– Risk Assessment and Risk Minimization
EN ISO 13849-x Safety of Machinery; Safety-Related Parts of Control Systems
ISO 13849-x Part 1: General Basic Design Principles
DIN EN ISO 13849-x Part 2: Validation
EN ISO 14121-2 Safety of Machinery - Risk Assessment;
ISO 14121-2 Part 2: Practical guidelines and process examples.
DIN EN ISO 14121-2
EN 55011 Industrial, scientific and medical high-frequency devices (ISM devices) -
CISPR 11 radio interference - limit values and measuring techniques
DIN EN 55011
VDE 0875-11
EN 60146-1-1 Semiconductor converters; general requirements and line-commutated converters
IEC 60146-1-1 Part 1-1: Defining the basic requirements
DIN EN 60146-1-1
VDE 0558-11
EN 60204-1 Electrical equipment of machines
IEC 60204-1 Part 1: General definitions
DIN EN 60204-1
VDE 0113-1
EN 60228 Conductors for cables and insulated leads
IEC 60228
DIN EN 60228
VDE0295
EN 60269-1 Low-voltage fuses
IEC 60269-1 Part 1: General requirements
DIN EN 60269-1
VDE 0636-1
IEC 60287-1 to -3 Cables – Calculation of the current carrying capacity
Part 1: Current carrying capacity equations (100 % load factor) and calculating the losses
Part 2: Thermal resistance -
Part 3: Main sections for operating conditions
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3
System overview
3.5 Standards
41