Panasonic LP-GS Series Serial Communication Command Manual page 108

4. Fill type is fonts
Name
Object No.
Code element
Fill type
Character code
(JIS Code)
Total data length
* Setting request data are variable length.
⿎ Example of command settings
Condition: Fill type is a horizontal line
Object No. = 1, Code element = 0, Fill type = 1, Module marking direction = 2,
Number of filling lines = 4, Module line length X = 0.5, Module line length Y = 0.5
• Setting
Transmission data
• Readout
Transmission data
Response data
108
Data length
Data contents
[byte]
Max. 4* "0000"–"1999"
QR code:
"1": Quiet zone outline
"2": Dark module
"3": Light module
"4": Alignment
"5": Finder
1
Data Matrix code:
"1": Quiet zone outline
"2": Dark module
"3": Light module
"4": Border
Max. 2* "00": Font
"2230"–"2239"
Max. 4* "8121"–"8152"
"0000": Do not mark
Max. 14 It is the length including the separator ",".
[STX] BRT
[STX] BRT
[STX] BRT
When the code type is micro QR code or
iQR code, you do not need to set "alignment".
Use fonts for the filling shape for the selected
code element.
• Specifies the character code of the font
used as a filling pattern in JIS code.
• Inputting the character code "0000"
encodes the 2D code with blank for the
specified part.
S 1,0,1,2,4,0.5,0.5
R 1,0 [CR]
A 0001,0,01,2,04,0.500,0.500
ME-LPGS-SR-5
Remarks
[CR]
[CR]