Panasonic LP-GS Series Serial Communication Command Manual page 96

2. When the code type is CODE128 and EAN/UPC/JAN
Name
Object No.
X-position
Y-position
Rotation angle
Code type
Bar code height
Narrow element width
Quiet/narrow ratio
Invert
Human readable text
Code marking
direction
Laser power
correction
Scan speed correction
Total data length
* Setting request data are variable length.
96
Data
Omit length
[byte]
– Max. 4* "0000"–"1999"
Y Max. 8*
"-999.999"–"+999.999" [mm]
Y Max. 8*
Y Max. 8* "-180.000"–"+180.000" [°]
"02": CODE128
(Y) 2
"04": EAN/UPC/JAN
Model
LP-GS051(-L)
Y Max. 7*
LP-GS052
LP-RC350S
LP-RF200P
Y Max. 5* "0.050"–"1.000" [mm]
Y Max. 4* "00.0"–"20.0"
"0": Do not invert
Y 1
"1": Invert
"0": OFF
Y 1
"1": ON
"0": One-way direction
Y 1
"1": Alternate
Y Max. 3* "000"–"999" [%]
Y Max. 3* "001"–"999" [%]
Max. 67 It is the length including the separator ",".
Data contents
Setting range [mm]
"000.050"–"055.000"
"000.050"–"030.000"
"000.050"–"085.000"
"000.050"–"090.000"
ME-LPGS-SR-5
Remarks
It is the center coordinate of the
code.
The rotation center is the
center of the code symbol.
Specify a larger value than the
line width in the object group
settings.
Ratio of the quiet zone width to
narrow element width.
Set "0" to mark a bar, "1" to
mark a space.
The correction ratio is
calculated using the value set
at the laser settings as 100%.