Panasonic LP-GS Series Serial Communication Command Manual page 30

• When the response permission of the marking end verification (MST) command is not set
External device
Verify that the
marking trigger
processing completed
before sending these
commands.
30
Marking trigger command: MRKS
Positive response: MRKA
Status checking command: STSR
Status readout response: STSA0,1,...
(Marking in progress/marking trigger ready OFF)
Status checking command: STSR
Status readout response: STSA1,0,...
(No marking in progress/marking trigger ready ON)
Marking trigger command: MRKS
Positive response: MRKA
ME-LPGS-SR-5
Laser marker
Check the laser
marker status when
appropriate.