System Settings Command; System Clock: Ymd - Panasonic LP-GS Series Serial Communication Command Manual

3-15 System Settings Command

3-15-1 System clock: YMD

Sets the date and time of the system clock of the laser marker. Functional characters such as the current date/time, expiry
date/time, and lot date/time are marked based on this system clock.
⿎ Setting request data / response data for readout
Start
YMD
code
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
YMD
code
⿎ Data description
Name Data length [byte]
Year
Month
Date
Hour
Minute
Second
Total data length
* Setting request data are variable length.
Reference
• The setting changed by this command is saved in the laser marker without overwriting to the file.
⿎ Example of command settings
Condition: Year = 2014, Month = 12, Date = 10, Hour = 18, Minute = 45, Second = 00
• Setting
Transmission data
• Readout
Transmission data
Response data
154
[Year], [Month], [Date], [Hour], [Minute],
Sub command
R (Check sum)
4 "1980"–"2099" [Year]
Max. 2* "01"–"12" [Month]
Max. 2* "01"–"31" [Day]
Max. 2* "00"–"23" [Hour]
Max. 2* "00"–"59" [Minute]
Max. 2* "00"–"59" [Second]
Max. 19 It is the length including the separator ",".
[STX] YMD
[STX] YMD
[STX] YMD
[Second]
Max. 19-byte
End code
Data contents
S 2014,12,10,18,45,0
R [CR]
A 2014,12,10,18,45,00
ME-LPGS-SR-5
(Check sum) End code
Remarks
[CR]
[CR]