Epson RC620 Safety And Installation page 29

1. Safety
Location Label Note
Be careful of the arm falling due to
the arm's own weight while the
brake release button is being
pressed.
* This label is attached to the
E
option brake release box.
Be careful of the shaft falling due
to the hand's own weight while the
brake release button is being
pressed.
Do not lift without the shipping
bracket.
To pick up the manipulator arm,
use two wire ropes of equal
length.
Remove the shipping brackets
and eyebolts before turning power
on.
Follow the directions in this
manual for installation and
F
transportation.
RC620 Safety and Installation Rev.8 17