G3 : Table Top Mounting
■ Install the Table Top Mounting Manipulator with two or more people.
CAUTION
(1) Secure the base to the base
table with four bolts.
Use bolts with specifications
NOTE
conforming to ISO898-1
Property Class: 10.9 or 12.9.
(2) Using nippers, cut off the wire
tie binding the shaft and arm
retaining bracket on the base.
(3) Remove the bolts securing the
wire ties removed in step (2).
(4) Remove the shipping bolt and
jigs.
RC620 Safety and Installation Rev.8
The Manipulator weights are as follows. Be careful not to get
hands, fingers, or feet caught and/or have equipment damaged by
a fall of the Manipulator.
G3-251* : approx. 14 kg: 31 lb.
G3-301* : approx. 14 kg: 31 lb.
G3-351* : approx. 14 kg: 31 lb.
10 mm
Wire tie
2. Installation
4-M8×30
Spring washe
r
Plane washer
Screw Hole
(depth 20 mm
or more)
Bolt
:M4×15
Sheet
51