Epson RC620 Safety And Installation page 107

4. Run the program
(1) Press F5 to run the program. (F5 is the hot key for the Run Window
(2) During project build, your program is compiled and linked.
(3) Click the Start button on the Run window to run the program.
(4) You should see text similar to the following displayed in the Status
On the Run window, you will see the output of the print statement.
RC620 Safety and Installation Rev.8
selection of the Run menu). You will see the Status window located at
the bottom of the main window showing the build operation status.
communications is established with the controller and project files are
sent to the controller. If there are no errors during build, the Run
window will appear.
window:
19:32:45 Task main started
19:32:45 All tasks stopped
3. First Step
Then
95