Epson RC620 Safety And Installation page 31

Manipulator (Non-UL)
Location
A
B
C
RC620 Safety and Installation Rev.8
Label Note
Before loosening the base mounting
screws, hold the arm and secure it
tightly with a band to prevent hands or
fingers from being caught in the
Manipulator.
Follow the directions in this manual for
installation and transportation.
Do not enter the operation area while
the Manipulator is moving. The robot
arm may collide against the operator.
This is extremely hazardous and may
result in serious safety problems.
Hazardous voltage exists while the
Manipulator is ON. To avoid electric
shock, do not touch any internal electric
parts.
1. Safety
19