Code Restriction Override/Toll Restriction Override - NEC SL1000 Features And Specifications Manual

Hide thumbs Also See for SL1000:

Table of Contents

SL1000/SL1100

Code Restriction Override/Toll Restriction

Code Restriction Override/Toll Restriction Override lets a user temporarily bypass the Code

Restriction for an extension. This helps a user that must place an important call that Code Restriction

normally prevents. For example, you could set up Code Restriction to block 100 calls and then provide

a Code Restriction Override code to your attendant and executives. When the attendant or executive

needs to place a 100 call, they just:

• Press Speaker key, dial a service code, and enter their override code.

• Press Speaker key and dial a trunk access code (e.g., 0 or # 0 002).

• Place the 100 call without restriction.

You can assign a different Code Restriction Override code to each extension. Or, extensions can

share the same override code.

Code Restriction Override overrides all Code Restriction programming. Walking Code Restriction

allows you to assign a Code Restriction level for each user. When a call is placed using Walking Code

Restriction, the restriction for the call is based on the Code Restriction level defined in PRG 21-05-xx

and PRG 21-06-xx.

• Off-Premise notification and external extensions require access to outside lines.

• In the Class heading in the SMDR report, POTA indicates that the call was placed using Temporary

Code Restriction Override.

• Code Restriction Override and Walking Code Restriction temporarily overrides an extension Code

Restriction.

• Users will hear, "Your call cannot go through. Please call the operator" when they dial a number that

Code Restriction prevents.

Default Settings

Related Features

Central Office Calls, Placing

Code Restriction/Toll Restriction

Station Message Detail Recording

Voice Response System (VRS)

Code Restriction Override/Toll Restriction Override

Show Quick Links

Table of Contents