NEC SL1000 Features And Specifications Manual page 516

SL1000/SL1100
• Search Contact: Name searches from all Speed dial bin and extension name
• New Contact: Saves new contact to Common/Group/Private Speed dial bin
• Edit Contact: Edits existing contact of Common/Group/Private Speed dial bin
User Feature (V1.5 or higher)
• Call Voice Mail
• Paging: Internal Zone, External Zone
• Department Group Log-In/Out: Join, Withdraw
Phone Setting
• Display: Contrast, Minimum Brightness, Maximum brightness, Backlight Threshold, Auto Backlight
• Ring Option: Ringing/Voice Call, Ringing Volume, Ring Tones (V1.5 or higher)
• Key Touch Tone (V1.5 or higher)
N
• Headset: Headset Ringing Volume (V1.5 or higher)
• Key Assignment (V1.5 or higher)
System Setting (V1.5 or higher)
• System Time
• System Date
Properties
• Phone
• System
• VoIPDB
• IP Address
If multiple persons save the data at the same time, same vacant bin number is used, so last saved data will
be valid.
• Pressing the Center Cursor key during terminal is idle, user can enter Navigation mode. If the
terminal has incoming call or ICM Hold it can not enter the mode.
• When set in Advanced mode 1 or 2, even terminal idle BGM volume will not change by up/down
cursor key. To change BGM volume it needs to press Speaker key first and change the BGM
volume as Speaker volume level.
• CO incoming call during in Navigation mode does not affect LCD status or Cursor key operation. It
continues Navigation mode.
• CO incoming call during in Navigation mode, up or down key operation works as a volume control.
(SL1000)
• In Navigation mode 20 Private Speed Dial bins can be used (set at PRG 13-01-02:1) beside 1000
Common Speed Dial bins, so a maximum of 1020 Speed Dial bins can be used.
• The diagram below shows supported feature and short cut number in Navigation mode.
1-506
ISSUE 2.0
Navigation Key