NEC SL1000 Features And Specifications Manual page 544

SL1000/SL1100
For Personal Speed Dial:
a. Dial the general trunk access code (9).
- OR -
Dial the Specific Trunk Service Code (#0) plus the trunk number (e.g., 005).
- OR -
Dial the Trunk Group Service Code (804) plus the trunk group number (e.g., 1).
b. Dial the number you want to store.
O
c. Press Hold key.
d. Press Speaker key.
For Speed Dial - System/Group:
a. Dial #2 to store a Speed Dial - System dialing number.
- OR -
Dial #4 to store a Speed Dial - Group dialing number.
b. Dial Speed Dial number storage code (e.g., 001).
c. Press Hold key.
d. Press Speaker key.
For Central Office Calls, Placing (Trunk Calling):
a. Dial the general trunk access code (9).
- OR -
Dial the specific Trunk Service Code (#0) plus the trunk number (e.g., 005).
- OR -
Dial the Trunk Group Service Code (804) plus the trunk group number (e.g., 1).
b. Dial the telephone number to be stored.
c. Press Hold key.
d. Press Speaker key.
For Service Codes:
a. Dial the Service Code you want stored.
b. Press Hold key.
c. Press Speaker key.
Checking the One-Touch Keys
To check the function of a One-Touch key:
1. Press Help key.
2. Press the One-Touch key.
The stored function displays.
Repeat this step to check additional keys.
3. Press Exit key.
1-534
If there are no trunks assigned in trunk group 10 or higher than this is correct. If there is a
trunk assigned in trunk group 10 or higher then the operation is below:
Dial the Trunk Group Service Code (804) plus the two digit trunk group number (e.g., 01).
The total of the digits stored in steps 3 and 4 cannot exceed 24.
Valid entries are 0~9, # and
Flash key. To enter a @ press Mute key.
For example, if you want a One-Touch Key to automatically clear your Last Number Redial,
enter 876.
*
. To enter a pause, press Transfer key. To store a Flash, press
ISSUE 2.0
One-Touch Calling