NEC SL1000 Features And Specifications Manual page 25

ISSUE 2.0
Guide to Feature Programming
Program Num-
ber
14-01-11 Basic Trunk Data Setup - Account Code Required
15-07-01 Programmable Function Keys
Account Code Key (code 50)
20-06-01 Class of Service for Extensions
20-13-20 Class of Service Options (Supplementary Service) - Account
Code/Toll Restriction Operator Alert (Restricted Operation
Transfer)
21-01-14 System Options for Outgoing Calls - Forced Account Code In-
ter-digit Timer
21-04-01 Toll Restriction Class for Extensions
21-24-01 Forced Access Dialing - Emergency Number
35-05-01 Account Code Setup - Account Code Mode
35-05-02 Account Code Setup - Forced Account Code Toll Call Setup
35-05-03 Account Code Setup - Account Codes for Incoming Calls
35-05-04 Account Code Setup - Hiding Account Codes
35-06-01 Verified Account Code Table - Verified Account Code
40-10-01 Voice Announcement Service Option - VRS Fixed Message
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for
incoming calls. This procedure is not available for Single Line Terminals.
1. Dial * .
- OR -
Press your Account Code key (PRG 15-07-01 or SC 851: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows an "
3. Dial * .
- OR -
Press your Account Code key (PRG 15-07-01 or SC 851: code 50).
To enter a Forced Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting
the system prompt you for your Account Code. You may also use this procedure if your system has
Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
Features and Specifications Manual
Program Name
SL1000/SL1100
Default
1
Refer to Programming Manual.
All extension port = Class 1
COS 01~15 = 1
3 (seconds)
2
No setting
0
0
0
0
No setting
1
*
" character on the telephone display.
A
1-15