NEC SL1000 Features And Specifications Manual page 213

ISSUE 2.0
• When defining trunks as DID or DID Mode in PRG 22-02-01, DID translation (PRG 22-11 or PRG
22-17) must be used, even if the incoming digits match the extension number.
• When using DID Call by Time Schedule and breaking out the Time Patterns, set the start time to
00:00 and end time to 00:00 for this feature to operate correctly. Refer to
Schedule on page 1-199
• DID Call by Time Schedule Priority is given to the pattern that is set manually. However, when a
time pattern changes with the time schedules set in PRG 22-17, the pattern applied by the Manual
change is canceled and the Time Pattern is given priority.
• When Transfer Operation Mode is set to busy, call queuing must be turned off for it to work.
Default Settings
Disabled
Related Features
Central Office Calls, Answering
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Off-Hook Signaling
Paging, External
Programmable Function Keys
Station Message Detail Recording
Transfer
Guide to Feature Programming
Program Num-
ber
10-03-01 ETU Setup
14-05-01 Trunk Group - Trunk group Number
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-09-01 Class of Service Options (Incoming Call Service) - Second
Call for DID/DISA/DIL Override
20-13-23 Class of Service Options (Supplementary Service) - Display
the Reason for Transfer
21-01-02 System Options for Outgoing Calls - Intercom Interdigit Time
22-01-06 System Options for Incoming Calls - DID Ring-No-Answer
Time
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group Assignment
Features and Specifications Manual
for more details.
Program Name
SL1000/SL1100
DID Call by Time
Default
Refer to Programming Manual.
Trunk Port 1~126 = Priority 1~126
(SL1000)
Trunk Port 1~96 = Priority 1~96
(SL1100)
Refer to Programming Manual.
All extension port = Class 1
COS 01~15 = 0
COS 01~15 = 0
10 (seconds)
20 (seconds)
0
Extension 200 (first port)
1-203
D