SL1000/SL1100
6.
Hang up.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press the line key or #0 plus the
trunk number + 724 ).
Continue/Disconnect Codes
To use the Continue code to extend a Tandem Trunk call:
1.
An external call connects to an external number either by transferring with Tandem Trunking or by
DISA caller.
2.
After the programmed time (PRG 24-02-07), a warning tone is heard and the user dials the
Continue code (PRG 20-28-01) to extend the conversation.
3.
After the programmed time (PRG 20-28-03), the warning tone is heard again. After the
T
programmed time (PRG 24-02-10), the call is disconnected.
1-686
Tandem Trunking (Unsupervised Conference)
ISSUE 2.0