NEC SL1000 Features And Specifications Manual page 747

ISSUE 2.0
5. Press Hold. You can set Name (PRG 13-04-02).
6. Press Hold and Enter the Transfer Mode 0 ~ 3 (PRG13-04-03).
TRF0 = Not defined
TRF1 = Internal Dial
TRF2 = IRG
TRG3 = Remote Monitor
7. Press Hold and Enter the Ringing Destination (13-04-04).
If you Select TRF1 ~3 following can be entered/
TRF1 (Internal Dial): Up to 36 digits
TRF2 (Incoming ring Group): 0-25
TRF3 (Remote Monitor): Dial Up to 4 digits
If you press Exit Key you can clear the digits you entered.
8. Press Hold and you enter the Incoming Ring Pattern (13-04-05).
0 ~ 9 can be entered and 0 ~ 9 are followings:
0 = Normal pattern
1-4 = Tone pattern (1-4)
5-9 = Scale pattern (1-5)
9. Enter the VRS Incoming Message Number : 000 ~ 100 (13-04-07).
10. If you set correctly you will hear the Confirmation Beep and see the following Screen.
11. Press Speaker and end the Setting.
Features and Specifications Manual
ABB0001
-
ABB0001
TRF (0-3)?0-
ABB0001 MXTarget
MX = X is Mode 1 ~3 (13-04-03)
ABB0001
Ring (0-9)? 1-
ModeX = X is Mode 1 ~3 (PRG 13-04-03)
ABB0001 MX
MX = X is Mode 1 ~3 (PRG 13-04-03)
Set ABB
SL1000/SL1100
ModeX
VRS
001
V
1-737