NEC SL1000 Features And Specifications Manual page 628

SL1000/SL1100
5. Dial VRS message number for watching, "001".
6. After beep tone, record the message.
7. Press Speaker key and finish recording.
To start Watch mode
1. Press Speaker key + dial 817 + 1 at terminal.
- OR -
2. Press the Function key (
- OR -
3. Watch mode time pattern 1 comes time to start.
4. Each 5 minutes interval, Watching message send to internal page group 1 and external page
group 1.
S
To stop Watch mode
1. Press Speaker key + dial 817 + 0 at terminal
- OR -
2. Press the red lit Function key (
- OR -
3. Watch mode time pattern 1 comes time to stop.
Warning Message (Use Security Sensor and Warning message)
< Program >
PRG 10-03-05 for SLT. Depend on Sensor, SLT port may need to set as DoorPhone type.
PRG 11-10-47: 715; Warning message setting
PRG 11-10-48: 717; Auto Dial Setting for Security Sensor
PRG 11-12-62: 816; Security Sensor Reset
PRG 11-12-64: 819+1/0; Security Sensor Mode Start/Stop
PRG 15-07-01: Set "
PRG 20-46-01: 1; Sensor mode, on
PRG 20-46-02: 1; Internal paging group, 1
PRG 20-46-03: 1; External paging group 1
PRG 20-46-04: 1; VRS message number for warning, 1
PRG 20-46-05: 999; Speed dial bin number, 999
PRG 20-46-06: 2; VRS message number for destination answer, 2
PRG 20-46-07: 30; Auto Dial Wait Timer, 30 sec
PRG 20-46-08: 3; Times of auto repeat dial, 3
PRG 20-46-09: 30; Auto dial calling time, 30 sec
PRG 20-46-10: 200; Monitored terminal number, 200
PRG 20-46-11: 30; Interval of Auto Dial, 30 sec
PRG 20-48-01: 1; Security sensor time pattern, 1
PRG 20-55-01: 60sec (default); Sensor delay timer (V1.5 or higher)
Set up Warning message
1. Press Speaker key + dial 715 at terminal.
2. Dial Security sensor number, "1".
3. Dial Internal paging group number, "01".
1-618
*
32) at Multiline Terminal and the Function key turn on Red.
*
32) at Multiline Terminal and the Function key turn off.
* 33" to Function key
ISSUE 2.0
Security