Trunk Group Routing - NEC SL1000 Features And Specifications Manual

SL1000/SL1100
Description
Trunk Group Routing sets outbound call routing options for users that dial the Trunk Group Routing
code (9) for trunk calls. Trunk Group Routing routes calls in the order specified by system
programming. If a user dials 9 and all trunks in the first group are busy, the system may route the call
to another group. When you are setting up your system, Trunk Group Routing helps you minimize the
expense of toll calls. For example, if your system has outbound line groups, use Trunk Group Routing
to route calls to the cheapest lines first.
T
There are 25 available Trunk Groups and 25 Routes.
Outbound Call
Conditions
• DISA (PRG 25-10) have separate Trunk Group Routing programs.
• The system uses Trunk Group Routing programming (PRG 14-06) when setting up Ringing Line
Preference.
• Use trunk group programming to set the order in which users access trunks within a specific trunk
group.
• Dialing 9 activates ARS, overriding trunk group routing if ARS service is turned on.
• Call Forwarding, Off-Premise is not supported when using Alternate Trunk Group Routing.
Default Settings
Enabled (All trunks are in Group 1)
System Availability
Terminals
All Stations
Required Component(s)
None
1-698
WATS
Least Expensive
First Choice

Trunk Group Routing

OCC
Moderately
Expensive
Second Choice
ISSUE 2.0
DDD
Most Expensive
Third Choice
Trunk Group Routing