NEC SL1000 Features And Specifications Manual page 169

ISSUE 2.0
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.
To Split (alternate) between the parties in Conference:
Multiline Terminal
1. Press DND/CONF key or Conf softkey (IP Terminal) (SL1000) Conf softkey or Conf key (PRG
15-07 or SC 851: 7) (SL1100).
2. Dial Split service code (894).
Repeat this procedure to alternate between the remaining parties in the Conference. Press the DND/
CONF key or Conf softkey (IP Terminal) (SL1000) Conf softkey or Conf key (SL1100) twice to set up
the Conference again.
Single Line Terminal
1. Hookflash and dial 894.
Repeat this procedure to alternate between the remaining parties in the Conference. Hookflash twice
to set up the Conference again.
To drop an outside call from the Conference:
1. Press Hold key to place the conference call on hold.
2. Hang up.
The lines involved in the Conference ring back separately to the telephone.
3. Answer and disconnect the unwanted outside call.
4. To re-establish the Conference, answer the remaining call by pressing DND/CONF key or Conf
softkey (IP Terminal) (SL1000) Conf softkey or Conf key (SL1100) after each call is answered.
Press DND/CONF key or Conf softkey (IP Terminal) (SL1000) Conf softkey or Conf key (SL1100)
twice when all calls have been answered.
To exit a Conference without affecting the other parties:
Multiline Terminal
1. Hang up.
If you press Hold key while on a call with two outside callers, the outside callers hear what is
programmed in PRG 10-04-01.
Features and Specifications Manual
SL1000/SL1100
C
1-159