NEC SL1000 Features And Specifications Manual page 312

SL1000/SL1100
Program
Number
42-02-01
42-02-02
42-03-13
42-05-05
42-06-01
H
42-06-02
42-06-03
42-06-04
42-06-05
42-06-06
42-06-07
42-06-08
42-07-01
Operation
None
1-302
Program Name
Hotel/motel Telephone Determines if an extension is defined
Setup - Hotel Mode as a hotel extension
Hotel/motel Telephone Determines the toll restriction class
Setup - Check-in Class applied when an extension is
checked in
Class of Service Op- Determines the PMS Restriction Lev-
tions (Hotel Service) - el.
PMS Restriction Level
Room Data Output for Determines the PMS Protocol type.
Hotel Service - PMS
Protocol type
PMS Service Setting - Determine the TCP port the applica-
PMS Port tion should connect to for the integra-
tion stream.
PMS Service Setting - Determine if the system scans the
3:00 AM Auto Room status of Hotel rooms at 3:00AM
Scan
PMS Service Setting - Determines whether a check-in or Out
Check-in Message Message is sent when the action is
performed on th ePBX
PMS Service Setting - Determines the room status when a
Check Out Automatic room is checked out
Status Change
PMS Service Setting - Defines the time that passes after any
AreYouThere/LineTest PMS message sent from the PBX that
Duration the PBX sends an AREYUTHERE
message.
PMS Service Setting - This is the retry count for un-acknowl-
AreYouThere/LineTest edged AREYUTHERE messages.
Send Count When this consecutive count of ARE-
YUTHERE messages is unacknowl-
edged, the PBX assumes the PMS
link to be inoperational (off-line)
Check-Out Auto Flexi- When PRG 42-06-07 and PRG
ble Status Change 42-06-04 are set to on, the status pro-
grammed with PRG 42-06-08 can be
set upon checkout regardless of the
previous status.
Status for Check-Out When PRG 42-06-07 is set to on, the
Auto Flexible Status status programmed with PRG
Change 42-06-08 can be set upon checkout.
PMS Restriction Level Defines the toll restriction class ap-
Conversion plied when a restriction level is re-
ceived from the front of house sys-
tem.
Description/Comments
ISSUE 2.0
Assigned Data
0 = Normal 1 = Hotel.
(default = Normal)
1-15
(default=1)
0 : Off 1 : On
(default = 1 (All Classes))
0 : Normal 1 : Fidelio
(default = 0)
0-65535
(default = 5129)
0=off, 1=on
(default = 0)
0 : Off 1 : On
(default = 0)
0=Checked out, 1=Checked out and dirty
(default =0)
1-128 sec
(default = 10 sec)
0-20 sec
(default =3)
0 : Off 1 : On
(default = 0)
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
* = Reserve 5
# = Reserve 6
1-15
(default 0=10, 1=11, 2=12, 3=13)
Hotel/Motel - PMS Integration