NEC SL1000 Features And Specifications Manual page 719

ISSUE 2.0
Guide to Feature Programming
Program Num-
ber
10-19-01 VoIP DSP Resource Selection
10-46-11 Multicast IP Address
10-46-12 Multicast Port
11-12-19 Service Code Setup (for Service Access) - Internal Group
Paging
15-05-38 IP Telephone Terminal Basic Data Setup - Paging Proto-
col Mode
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-13-29 Class of Service Options (Supplementary Service) - Pag-
ing Display
31-01-01 System Options for Internal/External Paging - All Call
Paging Zone Name
31-01-02 System Options for Internal/External Paging - Page An-
nouncement Duration
31-02-01 Internal Paging Group Assignment - Internal Paging
Group Number
31-02-02 Internal Paging Group Assignment - Internal All Call Pag-
ing Receiving
31-03-01 Internal Paging Group Settings - Internal Paging Group
Name
31-07-01 Combined Paging Assignments
Operation
To make an Internal Page announcement:
Multiline Terminal/IP Terminal
1. Press the zone Internal Paging key (PRG 15-07 or SC 852: 21 + 0 or 1~9 or 01~32 for zones (0
or 00 for All Call).
- OR -
Press Speaker key or lift the handset. Dial 801 and the Paging Zone number (0~9 or 00~32).
Dialing 0 or 00 calls All Call Internal Paging.
- OR -
Dial * 1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
Display indicates the Combined Paging as an External Page.
If the Internal Page Zone is busy or if there are no extensions in a page group, the page is announced
as an External Page only.
2. Make announcement.
3. Press Speaker key to hang up.
Features and Specifications Manual
Program Name
SL1000/SL1100
Default
Resauce = 0
224.0.0.10
30000
801
0
Refer to Programmming Manual
All extension port = Class 1
COS 01~15 = 1
GRP ALL (SL1000)
Group all (SL1100)
1200 (seconds)
0 for IP Station 1 for TDM Station
All Stations = 0
0 = Off
1 = On
All Stations = 0
Up to 12 Characters
01 = Group 1
02 = Group 2
:
32 = Group 32
1
U
1-709