NEC SL1000 Features And Specifications Manual page 799

ISSUE 2.0
To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
Use this key... For this feature...
Code: 37 Call Forwarding / Do
Operation: Call Not Disturb Override
extension + Press
key
Code: 38 Message Waiting
Operation: Leave
message: Call ext
+ Press key OR
Answer message:
Press key
Code: 39 Room Monitor
Operation: Press
key at destination
and source + ext
Code: 41 + sec. Secretary Call
ext.
Operation: Press
key
Code: 42 + boss
ext.
Operation: Press
key
Code: 43 Serial Call
Operation: TRK
call + Hold + ext +
Press key
Code: 44
Operation: Place
or answer call +
Press key
Code: 45
Operation: Place
or answer call +
Press key
Code: 46 Department Calling
Operation: Press
key
Code: 47 + dest. Reverse Voice Over
ext.
Operation: Press
and hold key
Code: 48 Voice Over
Operation: Hear
Off-Hook Signal-
ing tones + Press
key
Code: 49 + ext or Call Redirect
voice mail number
Operation: Press
key
Code: 50 Account Codes
Operation: Press
key
Features and Specifications Manual
and enter the code (e.g., 48 for Voice Over).
When you ...
Override an exten-
sion Call Forward-
ing or Do Not Dis-
turb.
Answer/Leave a
Message Waiting.
Activate Room
Monitor.
Call your secretary
(using the buzzer).
As a secretary pick
up a call ringing
your boss's exten-
sion.
Place a Serial Call
to a co-worker.
Hold Put a call on Sys-
tem Hold (if Hold
key is reassigned).
Put a call on Exclu-
sive Hold.
Log in or log out of
your Department
Calling Group.
Initiate Reverse
Voice Over.
Initiate or respond
to Voice Over.
Redirect an incom-
ing call to an exten-
sion or voice mail.
Enter Account Co-
des.
Key Lamp Status Also see Srvc
On red when activated
None
Fast Flash red at des-
tination, Hold Flash
red at source
On red at source Fast
Flash red at destina-
tion
On red when activated
None
None
None
On when removed, Off
when installed
Full BLF red
On red when respond-
ing Hold Flash red
when listening
On red when activated
Flashes when in DND/
Call Forward
None
SL1000/SL1100
Note
Code
807
* 0
or
0
-
-
-
-
-
-
750
- (SL1100)
890 (SL1100)
-
* or ##
2-21