Caller Id - NEC SL1000 Features And Specifications Manual

SL1000/SL1100
Description
Caller ID allows a display terminal to show an incoming caller's telephone number (called the Directory
Number or DN) and optional name. The Caller ID information is available as pre-answer display. With
the pre-answer display, the user previews the caller's number before picking up the ringing line.
On the CPU with MEMDB for Caller ID (also used for DTMF receivers and Call Progress Tone
Detection) 36 (SL1000) 32 (SL1100) resources are available. Each EXIFE provides an additional 32
resources.
C
Second Call Display
While busy on a call, the telephone display can show the identity of an incoming trunk or Intercom call.
For incoming trunk calls, the display shows the Caller ID or the trunk name if Caller ID is not installed.
For incoming Intercom calls, the display shows the calling extension name.
Caller ID supports the Telco Called Number Identification (CNI) and Called Number Delivery (CND)
service, when available.
The telephone display can show up to 12 Caller ID digits.
Once installed and programmed, Caller ID is enabled for all trunk calls, including:
• Ring Group calls
• Calls transferred from another extension
• Calls transferred from the VRS
• Calls transferred from Voice Mail (unscreened)
• Direct Inward Lines (DILs)
Caller ID temporarily stores 50 calls (total of abandoned and answered/unanswered). New calls
replace old calls when the buffer fills.
Temporary Memory
An unanswered call causes the Call History key (PRG 15-07 or SC 851: 08) to flash, indicating a new
call was placed in the temporary memory. If enabled in programming, the telephone display shows
CHECK LIST.
This Caller ID data from the temporary memory can be saved in either Speed Dial bins or in One-
Touch keys making them available for placing future calls.
Cursor Key Operation (When set PRG 15-02-60: 0)
Pressing the Left Cursor Key twice (on equipped terminals) displays the Incoming Call History.
By pressing the Left Cursor Key the user can access the Redial and Incoming Call History menus. The
flow chart below shows the menu access sequence. If the terminal is not allowed to have the Dial
Preview feature, these menus cannot be accessed.
1-100
ISSUE 2.0

Caller ID

Caller ID