[Cm1D] Ps-Id Assignment, Ps/Standard Sip Station Operation Data Download - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
1D
FUNCTION:
This command is used to assign the PS-ID, to download the PS/Standard SIP station operation data.
PRECAUTION:
(1) When a PS is set up initially, set the PS in Data Download Mode by applying power to the PS while
pressing the SEND key, and then execute the CM1D Y=20 in Calling Area No. 00.
(2) It takes 10 seconds to load the PS operation data to the PS.
(3) The following items display on the PCPro.
STATUS
Loading succeeded
PS is busy
PS is out of area
Lack of PS data
ASSIGNMENT PROCEDURE:
ST + + DE
1DYY
DATA TABLE:
Y
No. MEANING
01 Subline PS number to each
Primary PS station
14 Individual station type of
Standard SIP station
[8300R4]
NOTE: Set the second data to "0" when Standard SIP station is accommodated.
PS-ID ASSIGNMENT, PS/STANDARD SIP STATION OPERATION
DATA DOWNLOAD
DISPLAY
OK
WAIT BUSY NOW
WD ERROR
DATA ERROR
PS/STANDARD
+ SIP STATION No.
(1-8 digits)
PS/STANDARD
SIP STATION
No.
X-XXXXXXXX
(Primary PS
Station No.)
X-XXXXXXXX
(Standard SIP
station No.)
SETTING DATA
+ DE +
(1-9 digits)
SETTING DATA
DATA
X- Subline PS Station No.
XXXXXXXX X: 0-9, A (*), B (#)
NONE No data
0 PS (Less than 12 digits)
1 Roaming PS
(Less than 5 digits)
3-226
+ EXE
RELATED
COMMAND
MEANING
CM10 Y=04
CM10 Y=04
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM1D
: Default
91ch3002.fm