NEC UNIVERGE SV8300 Command Manual page 252

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
401 Entry of Authorization Code/Forced Account Code after dial-
ing an LCR access code and desired number
NOTE:
To provide this operation, the following data assignments are required.
- Toll restriction
(CM12 Y=01, CM8A Y=5XXX: 000, CM81)
- LCR origination
(CM20 Y=0-3: A126/A127/A128/A129, CM8A Y=5XXX: 180, CM85)
403 Trunk restriction class to be changed over when Check Out
(FTC=16, FC=2 or FTC=56, FC=2) is set from the PMS
[8300R3.5]
SERVICE RESTRICTION CLASS A
Y
MEANING
SERVICE
REST.
CLASS (A)
00
15
00
15
3-196
: Default
SETTING DATA
DATA MEANING
0 Allow (Authorization
Code)
1 Allow (Forced
Account Code)
2 Allow (Authorization
Code [PAD LOCK])
7 Restricted
1 Unrestricted (RCA)
2 Non-Restricted 1
(RCB)
3 Non-Restricted 2
(RCC)
4 Semi-Restricted 1
(RCD)
5 Semi-Restricted 2
(RCE)
6 Restricted 1 (RCF)
7 Restricted 2 (RCG)
8 Fully-Restricted
(RCH)
Set Room Cutoff
NONE
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CM15
91ch3002.fm