NEC UNIVERGE SV8300 Command Manual page 330

COMMAND CODE TITLE:
31
Y
DATA
A 16 Sending ACK-WINK signal to DTI on
receiving MF signal
[North America Only]
NOTE:
17 Signal kind of called number sent from T1
network
[North America Only]
NOTE:
18 Sending of ACK-WINK signal to DTI on
receiving DP signal
[North America Only]
NOTE:
30 Tone level of MFC (Forward Signal/Back-
ward Signal)
[8300R3.5]
NOTE:
31 Tone Duration (On time) of MFC (Forward
Signal/Backward Signal)
[8300R3.5]
NOTE:
MFC/MF-ANI TRUNK DATA
1ST DATA
MEANING
When the signal pattern from T1 network is FGD format, assign the data to "0".
When the signal pattern from T1 network is ANI format, assign the data "1".
When the signal pattern from T1 network is FGD format, assign the data to "1".
When the signal pattern from T1 network is ANI format, assign the data "0".
When the signal pattern from T-1 network is FGD format, assign the data to "1".
When the signal pattern from T-1 network is ANI format, assign "0".
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
DATA
0 To send
1 Not sent
0 DP
1 DTMF
0 To send
1 Not sent
01 -45 dB
90 -0.5 dB
91 0 dB
92 +0.5 dB
97 +3 dB
NONE -7.0 dB
01 20 ms.
98 1960 ms.
99 5100 ms.
NONE 100 ms.
3-274
: Default
2ND DATA
MEANING
Increment unit: 0.5 dB
Increment unit: 0.5 dB
Increment unit: 20 ms.
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CM31
91ch3003.fm