NEC UNIVERGE SV8300 Command Manual page 735

COMMAND CODE TITLE:
EA
FAULT KIND NUMBER
106
107
108
109
10A
10B
10C
10D
10E
110
112
114
115
116
11A
11C
11E
NOTE 1:
When the fault kind No. 022 is applied to IPT (P2P CCIS), the fault message means "IPT
link connection failure".
NOTE 2: The fault kind No. 062 is effective only for PZ-64IPLC-A/PZ-128IPLC-A.
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
SV8300 Blade reset with CME03
Lack of option value
Lack of Highway Channel
Auto Blade Reset by TDM-Blade Lockup
CPU SRAM failure
Restricted blade
Firmware version un-matching between CPU blade and Line/Trunk blade
Lack of Highway Channel for data communication
Illegal use of CPU blade for Remote Unit only
Communication error occurrence between active CPU and stand by CPU
Expansion Chassis (2U) failure
Automatic module reset due to Expansion Chassis (2U) lockup
Automatic system reset due to Expansion Chassis (2U) lockup
All blades lockup in Expansion Chassis (2U)
Communication error occurrence between Primary Unit and Secondary Unit
Internal BUS failure on CPU Blade
Restriction of Remote Maintenance via built-in modem
FAULT CONTENT
3-679
CMEA
NWA-033623-001 Rev.8.1
91ch3008.fm
JANUARY/31/2012