NEC UNIVERGE SV8300 Command Manual page 524

COMMAND CODE TITLE:
67
Y=90-92
Y
No. MEANING
90 Limit bandwidth
between locations
NOTE 1: Assign the value which exceeds the warning bandwidth set by CM67 Y=92.
NOTE 2:
Set the bandwidth for voice packet. The available bandwidth minus the bandwidth for control packet
(40 Kbps) is the bandwidth for voice packet.
If the reflection speed of terminals such as button reflection becomes slower by setting the value above
mentioned above, set the bandwidth for voice packet to value which the bandwidth for control packet
supposed more than 40 Kbps.
91 Action when the
traffic between
locations exceeds
the limit bandwidth
92 Warning band-
width between
locations
NOTE:
Assign the value which does not exceed the limit bandwidth set by CM67 Y=90.
LOCATION DATA ASSIGNMENT
1ST DATA
DATA MEANING
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
2ND DATA
DATA MEANING
00000 0 Kbps
65534 65534 Kbps
NONE 100000 Kbps (100 Mbps)
CCC Clear
0 Restrict the connection
between location groups
3 Keep the connection
between location groups
00000 0 Kbps
65534 65534 Kbps
NONE 100000 Kbps (100 Mbps)
CCC Clear
3-468
CM67
: Default
RELATED
COMMAND
CM12 Y=39/50
CM8A
Y=5000-5255:
173
CM67 Y=92
CMAD Y=29
CM12 Y=39/50
CM67 Y=90
CM8A Y=5000-
5255: 173
CMAD Y=29
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM67 Y=90
CMAD Y=29
NWA-033623-001 Rev.8.1
91ch3005.fm
JULY/18/2008