[Cm5B] Ip Address For Ip Trunk/Sip Trunk Point-To-Multipoint Connection - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
5B
FUNCTION:
This command is used to assign the destination IP Address for the IP trunk/SIP trunk Point-to-Multipoint
connection.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + DE
+ 5BYY
DATA TABLE:
Y
No. MEANING
01 Destination IP Address
for IP trunk/SIP trunk
NOTE 1: Set this command only for Point-to-Multipoint connection (when CMA7 Y=46 is set to "0").
NOTE 2:
Destination IP Address of opposite IP trunk (P2P CCIS) is the IP Address of opposite
SV8300 assigned by CM0B Y=0XX/1XX>00 or the IP Address of opposite 2400 IPX.
IP ADDRESS FOR IP TRUNK/SIP TRUNK POINT-TO-MULTIPOINT
CONNECTION
1ST DATA
+ DE
+
(5 digits)
1ST DATA
DATA
XXX ZZ XXX: 000-255
(IP Address Pattern No.)
ZZ: IP Address No. 00-07
2ND DATA
+ + EXE
(12 digits)
MEANING
NOTE 1
3-433
2ND DATA
DATA MEANING
0000000 Destination IP Address of
00001 opposite IP trunk/opposite
IPT (P2P CCIS)/opposite
2552552 SIP trunk
55254
NONE No data
Continued on next page
NWA-033623-001 Rev.8.1
CM5B
: Default
NOTE 2
91ch3005.fm
APRIL/16/2010