NEC UNIVERGE SV8300 Command Manual page 350

COMMAND CODE TITLE:
35
Y
No. MEANING
024 DTMF Inter-digital pause
025 DP Make Ratio
BLADE RESET
See PRECAUTION (2)
NOTE: This command is available for LDT/ODT when using 8300R6 software or later.
026 DTMF signal width
028 Outgoing Trunk Queuing
032 Distinctive lamp indication
on Multiline Terminal dur-
ing external incoming call
termination
NOTE:
The lamp indication for an internal incoming call is red (120 IPM flashing). For indicating the termi-
nation of transferred external incoming call, the flashing lamp color depends on CM08>137.
TRUNK ROUTE DATA
DATA
0 32 ms.
1 64 ms.
2 80 ms.
3 96 ms.
4 160 ms.
5 192 ms.
6 240 ms.
7 128 ms.
0 39 % Make Ratio
1 33 % Make Ratio
0 64 ms.
1 128 ms.
0 Not allowed
1 Allow
0 Green (120 IPM)
1 Red (120 IPM)
SETTING DATA
MEANING
3-294
CM35
: Default
RELATED
COMMAND
CM15 Y=002
CM08>137
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/31/2012