NEC UNIVERGE SV8300 Command Manual page 360

COMMAND CODE TITLE:
35
Y
No. MEANING
134 TOS field Precedence for
SIP trunk voice packet
TOS: Type of Service
NOTE 1: The higher number has higher priority.
NOTE 2: This data is recommended to set to "5". Consult with network manager when this data is changed.
NOTE 3:
This data setting is ineffective when CM35 Y=161 is set to provide DiffServ Qos.
138 Sending of received ANI
information from network to
VMS with MCI
140 Roaming Service
[For PCS]
[8300R2]
141 Pursuit function after Roam-
ing PS
[For PCS]
[8300R2]
144 ISDN-BRI Layer 1 activa-
tion
BLADE RESET
See PRECAUTION (2)
TRUNK ROUTE DATA
DATA
00 PRECEDENCE 0
07 PRECEDENCE 7
15 PRECEDENCE 0
0 To send
1 Not sent
0 Available
1 Not available
NOTE:
0 To provide
1 Not provided
NOTE:
0 Activated by call event
1 Always activated
SETTING DATA
MEANING
A trunk route of voice/control channel
on CCIS virtual trunk must be set to
"0".
When using roaming service, set the
second data to "0" for C.O. Trunk
route of called side PBX. Additionally,
to terminate a roaming call via a voice
channel trunk route of CCIS virtual
trunk, set the second data to "0" for the
trunk route.
3-304
CM35
: Default
RELATED
COMMAND
CM35 Y=161
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
APRIL/16/2010