NEC UNIVERGE SV8300 Command Manual page 283

COMMAND CODE TITLE:
1D
Y
No. MEANING
15 Terminal type of PS
[For PCS]/
Terminal type of Standard
SIP station
[8300R4]
NOTE 1: Set this data also to Subline PS station number, if provided.
NOTE 2:
The default data of CM1D Y=15 is "00" for North America.
NOTE 3: PS software version is represented by the lower 3 digits of the PS's issue number which is written on
the label in the rear side of PS.
16 Primary/Subline
20 PS Operation Data Down-
load
[For PCS]
21 PS-ID
[For PCS]
22 PS Location Search with no
ringing
NOTE: For Multiline Terminal PS II/Multiline Terminal PS III Type with PS, set the second data to 0. For the
other PSs, set the second data to "1".
PS-ID ASSIGNMENT, PS/STANDARD SIP STATION OPERATION
DATA DOWNLOAD
PS/STANDARD
SIP STATION
No.
X-XXXXXXXX
(Primary/Subline
PS Station No.,
Standard SIP
station No.)
X-XXXXXXXX
(Primary/Subline
PS Station No.)
X-XXXXXXXX
(Primary PS
Station No.)
SETTING DATA
DATA
00 Multiline Terminal PS II
Type with PS software ver-
sion 7.02 or later
05 Standard SIP station
[8300R3.5]
15 Multiline Terminal PS II
Type with PS software ver-
sion under 7.02/Former
Multiline Terminal PS Type
0 Subline PS
1 Primary PS
0 No data
1 Execute
XX...XX PS-ID
(Maximum 9 digits, Deci-
mal)
NONE No data
0 To provide when PS is idle
1 Not provided when PS is
idle
3-227
RELATED
COMMAND
MEANING
CM10 Y=04
CM10 Y=04
CM10 Y=04
CM10 Y=04
CM10 Y=04
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM1D
: Default
91ch3002.fm