NEC UNIVERGE SV8300 Command Manual page 372

COMMAND CODE TITLE:
35
Y
No. MEANING
276 ISDN Alternative Routing
for Remote Unit in survival
mode when receiving trunk
call
277 Call Completion to Busy
Subscriber (CCBS) for a call
originating office
[For EU]
278 Call Completion to Busy
Subscriber (CCBS) for a call
termination office
[For EU]
279 Pattern number for adding
an access code for outgoing
call to the calling number
stored by Message Reminder
when terminating a tandem
call via CCIS/SIP trunk
281 Calling party number relay-
ing in ISDN to ISDN/CCIS
to ISDN connection (for
incoming trunk route)
[For EU]
NOTE 1: This command must be set for incoming trunk route.
NOTE 2:
Calling party number relaying in ISDN tandem connection is available when both CM35 Y=281 and
CM35 Y=282 are set to 0.
TRUNK ROUTE DATA
DATA
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Pattern No. 0
7 Pattern No. 7
NONE No data
0 To provide
3 Not provided
SETTING DATA
MEANING
3-316
CM35
: Default
RELATED
COMMAND
CM50 Y=11
CM35 Y=282
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/14/2011