NEC UNIVERGE SV8300 Command Manual page 540

COMMAND CODE TITLE:
76
Y
No. MEANING
01 For Day Mode
02 For Night Mode
03 For Mode A
04 For Mode B
NOTE 1: When digit conversion of the leading 2-4 digits of a DID incoming LDN is available (CM35
Y=078, Data=0), the leading 2-4 digits of the LDN should be assigned as the first data. (When
the DID incoming LDN is one digit, the digit conversion for only one digit is not available.)
NOTE 2: Automated Attendant and Remote Access to System (DISA) via SIP trunk is effective when us-
ing 8300R5 software or later.
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number Conver-
sion Block No. XXXXXXXX
assigned by
CM76 Y=00/90,
CM2A Y=50-52
NONE
2ND DATA
MEANING
X Station number to be terminated
DXX Change terminating system to:
D02 Trunk Line (Direct) Appearance
D03 Trunk Line (Direct) Appearance +
TAS
D04 Direct-In Termination
D06 Direct-In Termination + Trunk Line
(Direct) Appearance
D09 Automated Attendant
D10 Attendant Console + TAS
[8300R2]
D11 Attendant Console + Trunk Line
(Direct) Appearance
[8300R2]
D12 Attendant Console + Trunk Line
Appearance + TAS
[8300R2]
D13 TAS
D14 Attendant Console
[8300R2]
D16 Remote Access to System (DISA)
No data
3-484
CM76
: Default
REMARKS
CM10
NOTE 1 CM11
CM35
Y=018, 78
CM30 Y=02,
03, 40, 41
CM30 Y=18
CM30 Y=04,
05, 42, 43
CM49
CM64
NOTE 2
NOTE 2
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/14/2011