NEC UNIVERGE SV8300 Command Manual page 578

COMMAND CODE TITLE:
8A
Y
No. MEANING
5000 LCR Pattern No. 000
5255 LCR Pattern No. 255
LCR DEVELOPMENT TABLE
DATA
164 Call by Call
WATS Band Number
[North America Only]
165 Caller ID on outgoing
call by CCIS/Q-SIG/SIP
166 911 Notification on
DESKCON/Multiline
Terminal
[North America Only]
167 IP Address Pattern
NOTE:
Set this command only for Point-to-Multipoint connection (when
CMA7 Y=46 is set to "0").
168 Destination Point Code
(DPC) for IPT (P2P
CCIS)/SIP Point-to-Multi-
point connection
NOTE 1: Set this command only for Point-to-Multipoint connection (when
CMA7 Y=46 is set to "0").
NOTE 2: Don't set the same DPC to two or more LCR Pattern number.
If the same DPC is set, some of CCIS Service (Attendant Camp-On
with Tone Indication-CCIS etc.) does not operate.
170 Echo canceller for SIP
trunk Point-to-Multi-
point connection
NOTE:
1ST DATA
MEANING
See CM5B, CMBA
Set this data when setting the echo canceller to each oppo-
site office respectively.
3-522
2ND DATA
DATA MEANING
00 WATS Band Number
09
NONE No data
0 To add
1 Not added
0 To provide
1 Not provided
000 IP Address Pattern No. 000
255 IP Address Pattern No. 255
NONE No data
00001 DPC
16367
NONE No data
0 Echo canceller OFF
1 Echo canceller ON
NONE No data
Continued on next page
NWA-033623-001 Rev.8.1
CM8A
: Default
91ch3005.fm
APRIL/16/2010