NEC UNIVERGE SV8300 Command Manual page 697

COMMAND CODE TITLE:
BC
Y
No. MEANING
15 Registration of Stan-
dard SIP station with-
out REGISTER
[8300R5]
NOTE 1: Whether the Standard SIP station number is available or not can be confirmed by CMFA Y=02.
NOTE 2:
Clear this data once when the readout data of CMFA Y=02 is "NONE" (IP Station is logout status/
IP Station has never been busy). Then set this data again.
NOTE 3: When the data for Standard SIP station or CM12 Y=97 is not assigned to the specified station in
registering the terminal, "DATA ERROR" is displayed.
NOTE 4: When the terminal is deleted by specifying the Standard SIP station ID while the call is in progress,
"WAIT, BUSY NOW" is displayed.
NOTE 5: Standard SIP station without REGISTER can be accommodated only for the Main Unit (Unit01).
16 IP Address for Greet-
ing process
[8300R5]
NOTE 1: This data must be assigned when using Data Conference/Instant Message between SV8300 and
SV7000/SV8500.
NOTE 2: Greeting List Initialize by CMBC Y=17 is required after setting this data.
17 Greeting List Initialize
[8300R5]
PRESENCE SERVICE, SIP CONVERTER, GREETING PROCESS OF
SP350
1ST DATA
DATA MEANING
XXX Standard SIP sta-
tion ID without
XXXX REGISTER
XXX-XXXX
: 000-511
RESET
[8300R6 soft-
ware or
before]
: 000-1023
[8300R7 soft-
ware or later]
000 Greeting No. 000
001 Greeting No. 001
000 Fixed value
2ND DATA
DATA
XXXX Standard SIP station
XXXX number without
REGISTER
(1-8 digits)
NONE No data
CCC Data clear
XXX.X IP address of the
X...X system for greeting
process (Maximum
15 digits)
XXX.XXX.XXX.XX
X=0.0.0.1-
255.255.255.254
NONE No data
CCC Greeting List
Initialize
3-641
: Default
RELATED
COMMAND
MEANING
CM12 Y=97,
98
CMBC Y=17
CMBC Y=16
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CMBC
91ch3007.fm