NEC UNIVERGE SV8300 Command Manual page 248

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
135 Keep volume level changed by volume button on Multiline
Terminal, after the call is finished.
136 Calling Number/Calling Name Display for ISDN/T1-ANI/
MFC-R2 incoming call
139 Short Message Notification (OAI)
[For PCS]
140 Pad Lock Set/Reset from station
141 Station Authorization Code Set/Change
143 IP Station Logout operation
146 Sending Switch Hook Flash for Adjunct Analog System
147 Voice Mail Private Password-CCIS
NOTE 1: The first data must be the preassigned VMS Service Restriction Class which is sent from the office via
CCIS.
NOTE 2: This command is not effective for the Service Restriction Class of own office.
148 PS Location Indication
[8300R2]
149 PS Location Indication on Multiline Terminal display
[8300R2]
204 Call Forwarding-PS Out of Cell (Zone) for PS Soft Key
[8300R2]
SERVICE RESTRICTION CLASS A
Y
MEANING
SERVICE
REST.
CLASS (A)
00
15
00
15
3-192
: Default
SETTING DATA
DATA MEANING
0 Allow
1 Restricted
0 Calling Number
Display
1 Calling Name Display
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Restricted
1 Allow
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Restricted
1 Allow
0 Allow
1 Restricted
0 Destination setting of
each PS
1 Destination setting of
each tenant
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
APRIL/16/2010
CM15