NEC UNIVERGE SV8300 Command Manual page 134

COMMAND CODE TITLE:
08
888 Setting of number of sending digits for printer
[8300R2]
890 Whether to provide ACC/AUTH for Station Individual Call
Record Print/Immediate Printout Call Record
[8300R2]
893 Setting of decimals for Call charge
[8300R2]
894 Replaying a Wake up call in English after replaying the first
Wake up call
[8300R2]
895 Printout of language information from Hotel Printer, when set
language indicated number from Hotel Console
[8300R2]
896 Memory used by Voice Response System (VRS)
[8300R3]
NOTE: When CM04 Y=01>12 is set to "0" (SRAM [Maximum 27000 calls]), CF memory is set to the memory
used by VRS regardless of this command.
897 Incoming/Outgoing Calls while the system is out of service
898 Assign the relay when using a Paging on Call Forwarding
[8300R2]
NOTE:
This data is effective only when the intervening station is a Virtual Line Station.
BASIC SERVICES
BASIC SERVICE
0 Printer for 80 digits
1 Printer for 20 digits
0 To provide
1 Not provided
0 Raise decimals to the next whole
number
1 Not raised
0 Available
1 Not available
0 Not available
1 Available
0 CF memory
1 SRAM (Built-in CPU)
0 Available
1 Not available
0 To operate the relay specified by the
intervening station
1 To operate the relay of PGD(2)-U10
Station (to use a Paging)
3-78
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JUNE/15/2011
CM08