NEC UNIVERGE SV8300 Command Manual page 177

COMMAND CODE TITLE:
0B
Y
No. MEANING
2XX 2 : VOIP Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
146 HLC Mode
[8300R3]
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
147 HLC threshold
[8300R3]
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
148 HLC Ramping out period
[8300R3]
NOTE 1:
Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
149 HLC Power TC
[8300R3]
NOTE 1: Do not change this data when the system is operated normally.
NOTE 2: This data is ineffective when PZ-64IPLC-A/PZ-128IPLC-A is used.
2ND DATA
DATA
0 Disable HLC
1 Enable HLC
2 Set HLC
Threshold
(As per CM0B Y=2XX>
147)
NONE Enable HLC
0006 +3 dBm0
0000 0 dBm0
FFFF -0.5 dBm0
FFA0 -48 dBm0
NONE -10 dBm0
10 10 ms./dB
1000 1000 ms./dB
NONE 700 ms./dB
1 4 ms.
2 8 ms.
3 16 ms.
NONE 4 ms.
3-121
: Default
RELATED
COMMAND
MEANING
CM0B
Y=300>XX4
CM0B
Y=2XX>147
CM0B
Y=300>XX5
CM0B
Y=2XX>146
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM0B
91ch3001.fm