NEC UNIVERGE SV8300 Command Manual page 377

COMMAND CODE TITLE:
35
Y=302-999
Y
No. MEANING
302 Paging station (PGD(2)-
U10) access from trunk
[8300R4]
306 Sending the Calling Party
Number when calling from
tandem connection
[8300R5]
NOTE 1: Assign this data to an outgoing trunk route that can be sent the Calling Party Number.
NOTE 2: When an outgoing trunk is SIP trunk, specify whether to send the Calling Party Number by CMBA
Y=44.
307 Calling Party Number when
calling from a station
[8300R5]
NOTE 1: Whether to be sent My line number/Sub line number per Line Key can be selected by CM13 Y=70/71.
NOTE 2:
When an outgoing trunk is SIP trunk, set the Calling Party Number by CMBA Y=44 and CM8A
Y=5XXX>176.
308 Prefix code for Calling Party
Number when calling from a
station/tandem connection
[8300R5]
309 Digits to be deleted from the
head of Calling Party
Number
[8300R5]
TRUNK ROUTE DATA
DATA
0 Restricted
1 Allow
0 Available
1 Not available
0 To send station number
1 To send Calling Party Number assigned by
CM12 Y=12, 13
2 To send Calling Party Number assigned by
CM12 Y=46, 47
7 As per CM8A Y=5XXX>176 (To send Calling
Party Number assigned by CM12 Y=12, 13
when calling to a trunk route)
X Prefix code for the Calling Party Number
(1-8 digits)
XXXX X: 0-9, A (*), B (#)
XXXX
Not added
NONE
00 No digit deletion
01 First 1 digit deletion
08 First 8 digits deletion
15 No digit deletion
SETTING DATA
MEANING
3-321
CM35
: Default
RELATED
COMMAND
CMBA Y=44
CM12 Y=12, 13,
46, 47
CM8A
Y=5XXX>176
CMBA Y=44
CM35 Y=310, 311
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/31/2012