[Cm40] Function Of Cpu Rs-232C Port - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
40
FUNCTION:
This command is used to assign the function of the RS-232C ports on the CPU blade.
The CPU blade has two RS-232C ports, which are used for the following purpose.
FUNCTION
PORT
PCPro
Built-in PMS
[8300R3]
MCI
External Printer for
PMS
VoIP log collection
MP-FP command
output
Built-in SMDR
Individual Station
Record by CIS
[8300R1 Only]
FUNCTION OF CPU RS-232C PORT
RS-232C PORTS ON THE CPU BLADE
UNIT01 UNIT02
PORT PORT PORT
1 2 1
 
*

(0) (1)
(0) (1)
  
(0) (1) (4) (5)
  
(0) (1) (4) (5)
[8300R2]
 
–
(0) (1)
: To assign –: Not assigned ( ): Port Location Number
UNIT03
PORT PORT PORT
2 1 2 1
* * * *
   
(0) (1) (0)
  
–
(6) (7)
  
–
(6) (7)
– – – –
3-328
UNIT04
REMARKS
PORT
2
* Available to use these ports

at the same time
(1) (Maximum 2/system [Maxi-
mum 1/system when built-in
modem is connected])
– Not available to use these
ports at the same time
(Maximum 1/system)
– Not available to use these
ports at the same time
(Maximum 1/system)
Not available to use these
ports at the same time
(Maximum 1/system)
– Not available to use these
ports at the same time
(Maximum 1/system)
Not available to use these
ports at the same time
(Maximum 1/system)
Not available to use these
ports at the same time
(Maximum 1/system)
Not available to use these
ports at the same time
(Maximum 1/system)
Continued on next page
NWA-033623-001 Rev.8.1
CM40
91ch3004.fm
APRIL/16/2010