NEC UNIVERGE SV8300 Command Manual page 238

COMMAND CODE TITLE:
13
No.
33 Port mode of Analog Port Adapter/
PGD(2)-U10 ADP
34 Designation of station connected to Dual
port mode of Analog Port Adapter/
PGD(2)-U10 ADP
35 Send or not ringing signal to the single
line telephone connected to Analog Port
Adapter
37 VMS Soft Key feature
NOTE: Set this data to VMS station
number.
39 WCS Roaming for Virtual Station of Vis-
itor PS
[For PCS] [8300R2]
40 Station number assigned by CM11 for
BLF-CCIS
41 Storage of the call history (IC) when
answering a station call
45 Group Call by Pilot Number Dialing
46 Call Forwarding-No Answer Timing
NOTE: Call Forwarding-No Answer Timing is as follows when second data is set as 0.
When the timer for each station is set up by CME6 Y=07, 08: The timer of CME6 Y=07, 08 is effective.
When the timer for each station is not set up by CME6 Y=07, 08: The timer of CM41 Y=0>100, 101
is effective.
49 Storage of the call history (IC) when han-
dling of unanswered call
STATION CLASS-2
Y
MEANING
BLADE RESET
See PRECAUTION (4)
See PRECAUTION (4)
SETTING DATA
DATA
0 Dual port mode
1 Single port mode
0 Station connected to Dual port mode of Analog Port
Adapter/PGD(2)-U10 ADP
1 Station not connected to Analog Port Adapter/
PGD(2)-U10 ADP
0 Not sent
1 To send
0 To provide
1 Not provided
0 Available
1 Not available
0 Other office station
1 Own office station
0 To store
1 Not stored
0 To provide
1 Not provided
0 As per CM41 Y=0>100, 101/CME6 Y=07, 08
1 As per CM41 Y=0>01, 15
0 To store
1 Not stored
3-182
: Default
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
JANUARY/14/2011
CM13