NEC UNIVERGE SV8300 Command Manual page 247

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
129 WCS Number Sharing
Sub station is controlled as same as main station, by Message
Waiting lamp control signal sent to main station
130 System Clock Setup by Station Dialing
131 Set Relocation
Setting Side
132 Being moved and changed by Set Relocation
Set Side
133 Automatic Call Forwarding set by DISA
134 Manual Call Forwarding set by DISA
NOTE 1:
Set Relocation is not available for the following combination.
• Single Line Telephone and Multiline Terminal
• PS and PS/Single Line Telephone/Multiline Terminal
• Single Line Telephone (DP) and Single Line Telephone (PB)
• Between the Multiline Terminal with the different number of Programmable Function Keys
• IP Multiline Terminal and Digital Multiline Terminal
NOTE 2: Combination of Multiline Terminals with different number of Line/Trunk keys Also, Set
Relocation should not be set to Multiline Terminals which accommodate the following
peripherals or function.
• DSS Console
• Add-on Module
• Analog Port Adapter
SERVICE RESTRICTION CLASS A
Y
MEANING
NOTE 1, NOTE 2
NOTE 1, NOTE 2
SERVICE
REST.
CLASS (A)
00
15
3-191
: Default
SETTING DATA
DATA MEANING
0 Main station and sub
station are controlled
1 Only main station is
controlled
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
APRIL/16/2010
CM15