NEC UNIVERGE SV8300 Command Manual page 111

COMMAND CODE TITLE:
08
390 Multiline Terminal tone ringer selection
NOTE 1: Set "0" (Available) by CM08>262 to allow the ring
test tone to be heard when using the "Feature + 3"
operation.
NOTE 2: When the ring tone 600 + 700 (Hz) is specified in
CM15 Y=083, 084 and/or CM35 Y=034, the ring
tone selection key of Multiline Terminal is ineffec-
tive.
391 Lamp indication on Multiline Terminal
392 Multiline Terminal ringing signal patterns for external call
[Other than North America]
394 Message Waiting lamp indication of Single Line Lamp
396 Multiline Terminal ringing cadence selection for Internal call
[Other than North America/Australia]
BASIC SERVICES
BASIC SERVICE
0 By pressing Feature key and dialing 3
1 As per CM15 Y=083, 084, 093,
CM35 Y=034, 164
0 Special
1 Standard
RESET
0 2 seconds ON-4 seconds OFF
1 0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
0 Flashing (1 second ON-1 second
OFF)
1 Steady lighting
0 2 seconds ON-4 seconds OFF
1 1 second ON-2 seconds OFF
3-55
: Default
SETTING DATA
NOTE 1
NOTE 2
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08