NEC UNIVERGE SV8300 Command Manual page 631

COMMAND CODE TITLE:
A7
Y
No. MEANING
10 ACM signal waiting timer after send-
ing IAI signal when originating calls
via CCIS
SIP trunk ringing/answer response
timer when time-out occurs alternate
routing is executed if provided
26 Calling Name Display-CCIS/SIP
trunk
NOTE: Effective when CM08>379:
0.
28 Calling Party Information transfer-
ring service
29 Multiple Call Forwarding-All Calls/
Busy Line/No Answer-CCIS
30 Busy Lamp Field (BLF)-CCIS
44 TOS field Precedence for IPT (P2P
CCIS) control packet
TOS: Type of Service
NOTE:
This data setting is ineffec-
tive when CMA7 Y=50 is set.
45 Release timer for IPT (P2P CCIS)
Point-to-Multipoint connection
46 Connection method for IPT (P2P
CCIS)/SIP trunk
CCIS CHANNEL/IP TRUNK/SIP TRUNK DATA 1
IPT (P2P CCIS) RESET
NONE
RESET
IPT (P2P CCIS) RESET
SETTING DATA
DATA MEANING
01 2 seconds
(2 seconds increments)
14 28 seconds
15 6 seconds
0 To provide
1 Not provided
0 To provide
1 Not provided
0 Allowed (Maximum 7 times)
1 Restricted (Only once)
0 To provide
1 Not provided
0 PRECEDENCE 0
7 PRECEDENCE 7
15 PRECEDENCE 0
000 30 seconds
001 1 minute
127 127 minutes
Not released
0 Point-to-Multipoint
1 Point-to-Point
3-575
CMA7
: Default
RELATED
COMMAND
CM08>379
CM08>370
CM42>72
CM35 Y=134
CMA7 Y=71
Continued on next page
NWA-033623-001 Rev.8.1
91ch3007.fm
JUNE/15/2011