NEC UNIVERGE SV8300 Command Manual page 167

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

COMMAND CODE TITLE:

1XX 1 : VOIP Port

XX: Unit No. (01-50)

LAN DATA ASSIGNMENT

Provide the system with

the automatic change-

over to normal mode

from survival mode after

the connection between

the Main Unit and

Remote Unit returned to

normal condition

Only Remote Unit (Unit No. 02-50) can be set by this data.

When this data is set to "0", it remains possible that the changeover

between survival mode and normal mode is occurred with frequency at

the heavily-loaded network environment.

While this data is set to "0" in Failover mode, when a Remote Unit is

changed over from survival mode to normal mode, a Remote Unit is

automatically connected to either Primary/Secondary Unit that is con-

nectable after restoring communication. Then a Remote Unit is reset

automatically.

Start time for the auto-

matic changeover to

Failover mode from

Normal mode after the

disconnection between

the Primary Unit and

Secondary Unit

This data is effective only for Secondary Unit (Unit No. 02-50).

Not provided

Not executed the automatic

changeover to Failover

0-30 seconds

2940-2970 seconds

90-120 seconds

Continued on next page

NWA-033623-001 Rev.8.1

JUNE/15/2011