NEC UNIVERGE SV8300 Command Manual page 148

COMMAND CODE TITLE:
0B
ASSIGNMENT PROCEDURE:
ST + 0BYYY + DE
DATA TABLE:
Y=000
Y
No. MEANING
000 Unit number setting
OFF LINE
RESET
LAN DATA ASSIGNMENT
1ST DATA
+ + DE
(2-3 digits)
1ST DATA
DATA MEANING
90 –
NOTE 1: This command should be set in each unit.
NOTE 2:
The registration/clear of this data is available only in off-line mode.
NOTE 3: Set the SENSE switch of the CPU blade to "1-4" when operating the
Unit as Unit No. "01-04" (for Main Unit). The Unit functions as Unit
No. "01-04" regardless of the setting of this data.
NOTE 4: Set the SENSE switch of the CPU blade to "0" after this data setting
when operating the Unit as Unit No. "05-50" (for Remote Unit). The
Unit functions as the Unit No. set by this data.
NOTE 5:
Connect PCPro directly to the CPU to be used as a Secondary Unit,
and assign a Unit number by this system data, when using Failover
system. Unit No. 02-04 is not necessary to be assigned Unit number by
this data.
[8300R6]
2ND DATA
+ + EXE
(1-128 digits)
2ND DATA
DATA
01 Unit No. 01
50 Unit No. 50
NONE Unit No. 01
3-92
: Default
RELATED
COMMAND
MEANING
CM0B
Y=0XX>141
Continued on next page
NWA-033623-001 Rev.8.1
FEBRUARY/29/2012
CM0B
91ch3001.fm