NEC UNIVERGE SV8300 Command Manual page 117

COMMAND CODE TITLE:
08
463 Send ANI/Caller ID/CPN to SMDR terminal
464 OAI TSAPI
SCF facility
465 SCF error code type
467 Method of readout the traffic information
NOTE:
Set the second data to 0 when measuring traffic data continuously per hour/day.
470 Send Backward GB signal when terminating to Attendant Con-
sole on DID MFC call
[8300R3.5]
471 Send Backward GB signal when terminating by tandem con-
nection or converting received digits on DID MFC call
[8300R3.5]
472 Request ANI signal/Caller ID from network when incoming
call terminates
[8300R3.5]
473 Assign the connecting method when receiving Backward signal
meaning Line Busy/Unallocated number/Congestion
[8300R3.5]
474 Send ANI signal to PSTN on Enhanced 911
[North America Only]
475 Sender Tone sending on Enhanced 911
[North America Only]
477 Select the Backward signal for ANI signal on DOD MFC call
[8300R5]
NOTE: Both CM08>477 and 487 should be set the same data.
BASIC SERVICES
BASIC SERVICE
0 To send
1 Not sent
0 Same as 2400 IPX system (recom-
mended setting)
SMFN Off-Hook indication sent
1
0 SCF error Detail
1 SCF error Kind
0 To readout from the newest data
1 To readout from the oldest data
0 Subscriber's Line control
1 Subscriber's Line Free (Charge)
0 Subscriber's Line control
1 Subscriber's Line Free (Charge)
0 Available
1 Not available
0 Not released trunk (Tone/Announce-
ment from C.O.)
1 Release trunk (BT/ROT from PBX)
0 To send
1 Not sent
0 Not sent (No tone)
1 To send
0 Backward GC
[Mexico Only]
1 Backward GA
3-61
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2011
CM08