NEC UNIVERGE SV8300 Command Manual page 151

COMMAND CODE TITLE:
0B
Y
No. MEANING
0XX 0 : Maintenance Port
XX: Unit No. (01-50)
RESET
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
91 Port selection for OAI
NOTE 1, NOTE 2
92 Port selection for SMDR
NOTE 1, NOTE 2
93 Port selection for PMS
NOTE 1, NOTE 2
100 SNMP port
NOTE 1: Only Unit No. 01 can be set by this data.
NOTE 2: This data is not effective for Secondary Unit (Unit No. 02-50).
101 Community Name
"admin"
NOTE 1: Only Unit No. 01 can be set by this data.
NOTE 2: Restrict the use of community name "admin" (set the community name
to "public") except the system construction.
102 Trap is sent to the SNMP
manager
103 Definition of the IP
address for the SNMP
manager
104 Kind of Trap message
(Specific, Object ID)
sent to SNMP manager
[Australia Only]
NOTE: Only Unit No. 01 can be set by this data.
2ND DATA
DATA
0 Maintenance port
1 VOIP port
0 Open SNMP port
NOTE 1
1 Not open SNMP port
0 Allow (admin)
1 Restrict (public)
0 To send
NOTE
1 Not sent
0 Subnet Mask of the IP
address for the SNMP
NOTE
manager (First place)
1 IP address for the SNMP
manager (Fourth place)
0 Variable Trap message by
external alarm kind (MJ/
MN/--)
1 Fixed Trap message
NOTE
3-95
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
JUNE/15/2011
CM0B
91ch3001.fm